In daily life, mold growth on items is a worry for most people, especially during the rainy season in the south. When it rains, there will be hot and humid conditions. Many items will have a resurgence of moisture. Mold will slowly grow in an environment that suits them. It grows slowly, causing serious mold growth on items. In the production environment of many factories, whether it is workshops or warehousing, the harsh environment will cause serious harm to the products, and mold growth is inevitable. In recent years, many foreign trade customers have encountered mold growth on their products, resulting in The loss of orders is serious, so it is very necessary for our environment to be sterilized.
Failure to carry out disinfection treatment in the warehouse will lead to the growth of mold on the goods. The main reasons for the growth of mold on the goods are excessive humidity in the warehouse and the lack of effective anti-mold measures. In a humid environment, the moisture in the air can easily create conditions for mold growth on the surface of cargo, especially for goods that are susceptible to moisture. Mold can multiply rapidly in a humid environment, causing mildew spots to appear on the surface or inside the cargo, which will seriously affect the cargo. The quality and appearance of the goods are affected. Failure to carry out disinfection in the warehouse will not only lead to the loss of goods, but also affect customer relations and brand image, exacerbating the dilemma of corporate market competition.
通过对仓库实地探查,建议贵司对仓库进行定期杀菌防霉:仓储、生产车间中会逐渐积累很多霉菌和细菌,会随着空气的流动带进产品或包装内,当温湿度合适,就容易大量生长繁殖,引起产品发霉。
一、仓库的基本要求
1.保持仓库干净、不漏水、渗水
1.1检查原料仓墙壁、顶部是否有蜘蛛网和霉变迹象,如果有此情况,请将墙壁、顶部、角落的蜘蛛网打扫干净,如果有部分地方已经发霉,可用进行杀菌清洁。
1.2检查墙壁是否存在漏雨、浸水现象,如果有漏雨或浸水的地方,及时进行防水处理。
2.物品摆放
2.1将包装好的货品用塑料搁板和地面隔开,距离在30cm左右即可;若为木料搁板容易吸潮,
可垫一层塑料薄膜;
2.2货品尽量不要靠墙摆放,距离墙面最好不小于50cm,不靠近卫生间等潮湿区域摆放。
2.3仓库应干爽清洁,排列整齐,保持空气的对流。
3.控制湿度
3.1确保仓库不存在漏雨、浸水现象。
3.2仓库应尽量与洗手间、可引起潮湿的水源、生产车间隔开。
3.3可安装一般的温湿度计监测仓库内外湿度,当外面的湿度大于仓库内的湿度时,务必关上门窗;当仓库内的湿度大于仓库外的湿度时,请打开窗户,将仓库内湿气散发出去。
3.4仓库内湿度控制在65%-70%以下最佳。